Your mix, your way.

Personal monitoring should be just that: personalized for whoever is listening. The EarMix 16M provides each channel with a 3-Band EQ and a limiter. This processing is also available for the main bus, allowing each musician to sculpt a mix that works best for them. Channels can be easily grouped, simplifying complex mixes. Once you’ve perfected your monitor mix, save the whole scene to internal memory; you can store and recall up to 16 mix scenes locally.

Loud and clear.

High-quality monitoring is crucial for artists to deliver their best performance, so we’ve given the EarMix 16M personal monitor mixer a loud, clear headphone amplifier that can drive low-impedance devices such as professional-caliber in-ear-monitors. We started with a top of the line digital-to-analog converter for wide dynamic range and low signal-to-noise ratio. We took special care in the amplifier design to deliver excellent sonic performance, whether you’re using custom-molded in-ears or your favorite pair of studio headphones.

Analog Input/Output

• 1/8-inch stereo aux input
• 2 Balanced ¼-inch TRS line outputs
• ¼-inch TRS stereo headphone output with loud, clear headphone amp that can drive low-impedance in-ear monitors

Meters, Controls, and Processing

• 3-band EQ with sweepable mid frequency on all channels and main mix
• Limiter on all channels and main mix
• Stereo channel linking
• Channel grouping
• Solo and Mute
• Mix scene Store and Recall; store up to 16 mix scenes locally
• 16 Signal present and clip LEDs (one for each input)
• 8-segment stereo output meter
• Channel Level rotary control with 8-segment level indicator
• Aux Input level control
• Independent Monitor (line out) and Phones level controls
• Routing setup from StudioLive Series III consoles and UC Surface

Digital

• 16 mono channels of input via AVB networking
• 2 AVB Ethernet ports
• 24 bit, up to 48 kHz operation

Power

• External 24 VDC power supply (included)
• Support for PoE power

Physical

• Mic stand mounting option (sold separately)

Headphone Output
Type	¼” TRS Female, active stereo
Maximum Output	150 mW/ch. @ 60Ω load
Frequency Response	20 Hz – 20 kHz (± 0.05 dB)
THD+N	0.01%, 1 kHz, max gain, 20 Hz BW, unwtd

Line Outputs
Type	¼” TRS Female, balanced
Maximum Output Level	+18 dBu, ±0.5 dBu
Output Impedance	100Ω

Digital Audio
DAC Dynamic Range	115 dB (A-wtd, 48 kHz)
AVB Audio Network Ports	RJ45
Sampling Rate	48 kHz, 44.1 kHz

Power
External Power Supply	24 VDC
PoE Power	802.3at Type 1

Physical
Height	1.8” (46 mm)
Width	9.4” (239 mm)
Depth	7.6” (193 mm)
Weight	1.2 lbs (0.5 kg)